Fireplace Fitter Banstead Surrey (SM7): Opening up a disused fireplace to fit a wood burner, a gas fire or an open fire is an effective way to add a homely feel and some character to your Banstead property. Cold winters' evenings can become a pleasure as you sit in front of your fireplace listening to the crackle of firewood, and if your fire is used in combination with a back boiler you can even benefit from plentiful hot water as well.
There are a few vital things you must think about before you commence any work, in order to create a safe, efficient and attractive fireplace in your home. Any combustible appliance within residential homes in Banstead must follow Part J of the Building Regs, and this applies to hearths, chimney breasts, fireplaces and flue linings. Planning permission may also be necessary before work begins if your property is in a conservation area or is a listed building.
PROFESSIONAL OR DIY FIREPLACE INSTALLATION?
A straightforward renovation of an existing fireplace can be completed by a keen DIY person, but if any construction work is required there is the chance of encountering structural issues that will have to be handled professionally. It may be the case that when you remove the covering from a disused fireplace to find a hidden gem which requires nothing more than a good clean and a check from a chimney sweep to get a roaring fire going once again. It is much more likely that you'll discover old brickwork that needs structural reinforcement and a blocked flue.
It's usually recommended to benefit from the experience and know-how ofin Banstead, because of the severe fire and health risk problems associated with a poorly installed or renovated fireplace. Airflow must be sufficient in any room which has a fireplace; and it is a requirement in the Building Regulations (Part J) that this is so. A build-up of deadly carbon monoxide fumes can be the result in an area where there is insufficient airflow, and death or serious injury is a risk when a fire does not burn effectively.
To overcome this problem a professional Banstead fireplace installer will analyse the situation and install vents around the room, or beneath the floors, to guarantee a sufficient airflow for the fire to combust properly and safely. Blocked off and unused chimney flues might also need to have air vents installed since they can often trap moist air causing damp to occur inside the chimney breast.
BEFORE WORK COMMENCES
A huge amount of dust and soot can be discharged from a bricked up chimney when opening it up for restoration. Even with coverings for your furniture, the risk of damage from dirt and soot is still likely and it is advised to remove your furniture, rugs and carpets before any fireplace restoration work commences. If you are installing a fireplace as part of a larger renovation then it ought to be one of the first things to be worked on after you have taken the room back to bare floors and walls. By opening up a fireplace first you'll stop any chimney soot causing discolouration damage to other stages of your project, such as paint on walls or fresh plasterwork.
CONSTRUCTION AND STRUCTURAL WORK
Once you've exposed your old fireplace you'll have a better idea of the work that needs to be done, and also be in a position to rigorously sweep the chimney and clean any sections of hearth that remains in place. You now need to speak to your chimney sweep, if you haven't already done this, to come and clean the old chimney and fireplace. They will not only make certain your chimney and flue are completely clean, but they can additionally assess the condition of the chimney and flue liner and offer guidance if you need to upgrade any part of the chimney and flu, such as the flue lining.
It could be vital to fit a new flue liner to comply with the Building Regulations, and construction might also be needed to strengthen the existing chimney and breast. These are jobs that need to be done by a capable craftsman with a knowledge of the pertinent regulations and quality construction skills.
In older buildings you may find that the revealed fireplace is too big for your purposes, in which case a concrete supporting lintel will be required to modify the opening. When this has been completed the next phase of your fireplace installation in Banstead will be to update the hearth. In earlier times the hearth would be sunken into the floor, but the current building regs require it to be raised above floor level. If your fireplace is not a standard size you might have to choose a made to measure hearth, but there are also a wide variety of ready to fit hearths in marble, concrete or slate.
STYLES OF FIREPLACE
Choosing your ideal fireplace can be tricky when faced with the different sizes, designs and shapes that are available from a fireplace showroom or online store. Not all fireplaces might be suitable for your existing flue and chimney therefore it's wise to accept any advice offered by your sales and installation team with regards to your particular circumstances.
You home's age, and the style that you're trying to develop for your room, should all help you decide upon the design and type of fireplace that's best for you. For example, a cast iron wood burner looks wonderful set back in an inglenook fireplace, highlighting the character of the stove and reflecting the heat into the room effectively.
A cast iron wood burner is also a splendid option if your home hasn't got a chimney breast. A chimney is not required as a stainless steel flue is fitted to the top or rear of the stove and taken out through an outside wall.
ELECTRIC, MULTI-FUEL, OPEN, GAS OR WOOD FIREPLACE?
The charm and ambience of an open fireplace can't be surpassed, but what options are out there if this sort of fireplace isn't possible in your Banstead home?
Open Fireplaces - The traditional fireplace which can make use of various fuels such as briquettes, wood, smokeless coal and other burnable materials. In the bad old days an open fire may have been associated with being draughty, inefficient and smoky, but a well installed modern fireplace is a joy to sit in front of and bask in the warmth it provides.
Electric Fireplaces - Electric fireplaces can be fitted easily and safely by anybody who's reasonable competent and there are styles which are appropriate for any room and house in Banstead. They can be set into traditional fireplaces, and with the "real" looking feel of modern electric fires it can sometimes be hard to distinguish from the real thing.
Multi-Fuel Stoves - Multi-fuel stoves can be used with a range of fuels, (wood, gas, coal, oil) to create an attractive focal point in your house in Banstead. Some types, such as the multi-fuel stoves from AGA, can also be used for generating hot water, cooking and heating your entire house.
Gas Fireplaces - Providing instant heat and more efficient when compared to wood burning stoves or open fireplaces, there are a whole host of designs and styles to suit any type of Banstead home. Gas fires must only be maintained and installed by a suitably qualified Gas Safe registered engineer, (formerly CORGI registered).
Wood Burning Stoves - Even the smallest room in Banstead can be improved by the installation of a wood burning stove, which come in an array of styles, and can even be installed as a freestanding feature. If fitted with a back boiler they can provide steaming hot water to heat radiators or for other use around the home.
Fireplace installations are available in Banstead and also in nearby places like: Nork, Ewell, Motspur Park, Hooley, Carshalton on the Hill, Morden, Sutton, Stoneleigh, Belmont, Ashtead, Coulsdon, Epsom, Chipstead, Burgh Heath, Woodmansterne, and in these postcodes CR5 3NU, KT20 6HF, KT20 6BF, SM7 1DA, KT20 6NY, KT17 3HN, KT20 6BJ, KT20 6DT, SM5 4HT, KT20 5NJ. Locally based Banstead fireplace specialists will most likely have the dialling code 01737 and the postcode SM7. Click the "quote" banner to get information on fireplace installation in your location.
Banstead Fireplace Related Tasks
There are a number of different tasks that can be completed by your local Banstead fireplace fitter including inglenook fireplace installation Banstead, brick fireplaces, inset stove installations, chimney modifications in Banstead, electric fire baskets, bespoke fireplaces, wood burning fireplaces, double-sided stove installation, open fireplaces Banstead, cast iron fireplace installations, stone fireplaces, oak beam fireplaces, freestanding stoves in Banstead, marble fireplace installation in Banstead, cheap fireplace installation, fireplace packages, fireplace removal Banstead, fireplaces, modern fireplaces, gas fireplace installations, gas fireplaces Banstead, Victorian fireplace installations in Banstead, cast iron fireplaces Banstead, chimney sweeping in Banstead, fireplace mantels, electric fireplace installations, and lots more.
Information, Help and Social Media
Forums exist on most subjects, and fireplace installation is no different, so take a peek at the Buildhub Forum, discussions include pellet stoves and boilers, chimney designs, widening fireplaces, log burning stoves, trims for stoves and understanding building regulations. To learn how fireplace installers are promoting themselves on social media, check this out. By doing a quick online search you will be able to locate plenty of helpful articles regarding fireplace ideas, fireplace decoration and fireplace installation - we were able to uncover this engaging one about fireplace design ideas check this out. Watch a YouTube video tutorial on do-it-yourself fireplace installation here. Pop along to Wikipedia to find more facts about fireplaces.
Searching For Fireplace Installation On the Web
If you are trying to find tradesmen in Banstead, you'll most likely hook up to the internet first of all to see what is available. The truth is, you probably used Ask, Yahoo, Bing or Google to locate the web page that you're viewing at this instantaneous. Looking through such listings can be a bit troublesome and all may not be as it appears initially. In this precise scenario you'll be typing something like "fireplace installation near me", "fireplace installation in Banstead", "Banstead fireplace installation" or "fireplace installation Banstead" to locate the ideal person.
If you analyze the consequential page one listings, you'll notice that the upper and lower four results will be some sort of PPC advertisements, whilst a lot of the remainder are often for large lead creation sites such as Quotatis, Bidvine, Checkatrade, Rated People, TrustaTrader or My Builder or directories like ThreeBestRated, Yell, Yelp or Hotfrog. If you navigate to the second or third pages of the listings you may perhaps stand a better chance of finding the websites of genuine fireplace installers nearby. Consequently you'll need to delve deeper to discover them.
Fireplace Installers Near Banstead
Also here. Why not get started with your fireplace installation right away?: Nork fireplace installers, Morden fireplace installers, Motspur Park fireplace installers, Burgh Heath fireplace installers, Chipstead fireplace installers, Woodmansterne fireplace installers, Hooley fireplace installers, Belmont fireplace installers, Carshalton on the Hill fireplace installers, Stoneleigh fireplace installers and more. Companies who install can be found in all these towns and areas. Possessing the necessary know-how and experience, these skilled tradesmen can successfully install fireplaces in your property. These dedicated professionals can help residents experience the comfort, ambiance and warmth that brings to their homes. Local residents can get fireplace installation quotes by simply going
- Banstead Fireplace Installation Estimates
- Banstead Fireplace Mantels
- Banstead Fireplace Installers
- Banstead Victorian Fireplaces
- Banstead Fireplaces
- Banstead Wood Burning Fireplaces
- Banstead Cast Iron Fireplaces
- Banstead Fireplace Installation
- Banstead Fireplace Fitters
- Banstead Fireplace Installation Services
- Banstead Fireplace Repair
- Banstead Fireplace Surrounds
- Banstead Marble Fireplaces
- Banstead Electric Fireplaces
To obtain local Banstead info take a look here
Fireplace installation in SM7 area, and dialling code 01737.