Fireplaces Kingswood

Kingswood Fireplace Installation & Repair

Fireplace Fitter Kingswood Gloucestershire (BS15): Opening up a disused fireplace to put in an open fire, a gas fire or a wood burner is a wonderful way to add a bit of charm and a homely feel to your Kingswood property. Nippy winters' evenings can become enjoyable as you relax in front of your fireplace surrounded by the crackle of firewood, and if your fire is combined with a back boiler you can even benefit from cheap hot water too.

Quotes for Fireplaces Kingswood

In order to build an attractive, efficient and safe fireplace in your home in Kingswood, there are vital things to consider before you commence any work. Work which is conducted on the flue linings, chimney breasts, fireplaces and hearths of any heating appliances, must follow Part J of the UK's Building Regulations. If you reside in a listed building or are in a designated conservation area you must check with the local authorities to find out if planning permission is necessary for installing a fireplace in your house.

Kingswood Fireplaces Gloucestershire

PROFESSIONAL OR DIY FIREPLACE INSTALLATION?

You may be able to do some of the remodeling work on a pre-existing fireplace if you've got the ability needed, but there is always a problem in finding safety and structural problems which need to be resolved by a specialist. When you reveal the old fireplace, you may be lucky and find that to get a fire roaring once again, it needs nothing more than a thorough clean out of the hearth and a sweep of the chimney. What you'll more likely find is a pile of old, crumbling bricks that hides issues such as a blocked chimney or a lintel that requires replacement.

If your property in Kingswood has a fireplace installed and it isn't put in correctly, there isn't only a risk or fire, but also of respiratory health conditions. So, using a professional fireplace fitter is widely recommended in most cases. Airflow has to be satisfactory in any room which has a fireplace; in fact it is a requirement in the Building Regulations that this is so. Not enough oxygen means the fire will not burn well, and an accumulation of carbon monoxide could occur, which can lead to injury or death.

To guarantee suitable oxygen levels reach the fire at all times, and to safely get over any issues with air flow, vents could be fitted around the room as part of a fireplace installation. Blocked off and unused chimney flues might also have to have air vents installed as they can sometimes trap moist air within them causing damp to develop inside the chimney.

Fireplace Installations Kingswood (0117)

BEFORE WORK BEGINS

Opening up an old fireplace can create large amounts of soot and grime. It's sensible where feasible to remove rugs, carpets and furniture from the area before any work starts, although a fireplace installer will bring dust sheets to cover up for your home furnishings. Due to the mess that is involved, if the fireplace installation is only part of a larger refurbishment project, it should be one of the first things that you tackle. If other work has recently been done, this may be affected by dust and chimney soot.

STRUCTURAL & CONSTRUCTION WORK

When the fireplace has been successfully opened up, you will have a much clearer picture of the kind of renovation work that needs to be done. You can then also proceed with sweeping the chimney and cleaning any salvageable portions of the hearth. You now need to speak to your chimney sweep, if you haven't already done so, to come and clean the old fireplace and chimney. As well as cleaning and sweeping your chimney and flue, they'll also assess the condition of your flue liner and chimney and tell you about any component of the flue and chimney structure that needs replacing.

Kingswood Fireplace Fitter Quotes

Construction might be required to beef up the original breast and chimney, and it may also be necessary to fit a new flue liner. All of this work will have to abide by the latest UK Building Regulations which are there for your safety. Experience in the right construction techniques and a knowledge of the appropriate Building Regs will be essential for anybody who does this sort of renovation work, so you really want a skilled builder or fireplace fitter and shouldn't try to do this on your own.

In older buildings you may find the exposed fireplace is too large for your needs, which will mean that a concrete supporting lintel will be needed to adapt the opening. The installation, renovation and upgrade of the hearth can commence once the lintel is in place. The circumstances with hearths has changed quite a bit down the years, and while in past times they were quite often set into floor voids, they now must be laid slightly above the normal floor level if you are to abide by the current Building Regulations in the UK. You can get bespoke solutions to fit pretty much any size and design of fireplace, or you can choose from a variety of popular size and shape hearths to match your decor.

Fireplace Fitter Near Kingswood Gloucestershire

FIREPLACE DESIGNS AND STYLES

Because of the wide range of different fireplace designs and styles, selecting the right one might not be that straightforward. You can see what is available by visiting your nearest fireplace dealership or by going online. The advice and recommendations from your installation team, which will be in accordance with your particular requirements, will help you to choose a fireplace that is both suited to your existing chimney and flue, and suited to your home's decor.

The age of your property, and the style that you're trying to create for your room, should all help you to decide upon the design and type of fireplace which is most suitable for you. If you are lucky enough to have a house with an inglenook fireplace for instance, this can be a perfect position for an old-fashioned iron wood-burner stove. This won't only reflect any heat that is generated back into the room, but will also put the focus on the charm and character of the stove.

You've still got possibilities for a fireplace feature by putting in a wood burning stove, even if your Kingswood property does not have a chimney breast. This type of fireplace can be installed with a flue that is routed through an external wall and does not require a chimney, to be installed and work safely.

WOOD, ELECTRIC, MULTI-FUEL, GAS OR OPEN FIREPLACE?

If your situation doesn't allow for a natural fireplace, what are the possible options?

Gas Fireplaces - There are a variety of different designs to suit all types of home and their efficiency to warm a room is superior to open fireplaces. Must be professionally maintained and fitted by a Gas Safe certified engineer.

Electric Fireplaces - Straightforward installation and a varied choice of designs make electric fires a popular choice for Kingswood homes without a chimney. Modern electric fires can be installed in your property, even if you have a conventional fireplace, and some of them look almost like an authentic fire with crackling sound effects and dancing flames.

Multi-Fuel Stoves - To establish an excellent focal point in your living space, these stoves can burn a number of different fuels, such as gas, smokeless coal, wood or oil. If you opt for a multi-fuel stove from the AGA range for example, you can get hot water, do cooking, and when connected to your central heating system, heat your whole home.

Fireplace Fitters Kingswood

Wood Burning Stoves - These stoves come in traditional or modern designs to suit your decoration, and they've become "the in thing" in many Kingswood households. When used in conjunction with a back boiler, these can provide extra heating capabilities by transferring the hot water to a cold spot in your home via a radiator.

Open Fireplaces - This is the timeless fireplace, creating a good focal point for a room or living area, and can use various different solid fuels, such as briquettes, wood, anthracite nuts nuts and coal. Being far from the smoky fireplaces of yesteryear, a professionally fitted open fire can provide a cosy and warm atmosphere in any Kingswood home.

Quotes From Open Fire Installers Kingswood

It's not only in Kingswood that you're able to hire fireplace fitters - neighbouring places like: Kingscote, Hillesley, Charfield, Didmarton, Falfield, Bournstream, Wickwar, Bradley Green, Synwell, Wortley, Hawkesbury Common, West End, Cromhall, Wootton-under-Edge, North Nibley can also be covered. Locally based Kingswood fireplace services will probably have the dialling code 0117 and the postcode BS15.

Hints To Maintain Your Open Fireplace And Lower Your Heating Bill

The age-old open fireplace may have lost a certain amount of of its glamour because of environmental worries but it's still loved by many in Kingswood. Sitting in front of the warmth of a fireplace, revives many special memories for lots of folks. There are countless benefits to having a fireplace although there are a few drawbacks that may need to be taken care of. As power costs increase, you'll want to make sure that your fireplace is giving you heat efficiently. When you have a fire going in the fireplace, it can in fact take away warm air away from the room, making your heater work harder. Anytime there is no fire, a damper should manage the airflow. Often times though, fireplace dampers can often be inefficient in keeping warm air in the home and cold air out.

Open Fireplaces Kingswood

What many people in Kingswood may not know about their fireplace is that it doesn't necessarily do precisely what they imagine it's doing. Instead of keeping the cost of heating down, it may actually do the exact reverse if one isn't careful. There's a simple way to take your ineffective fireplace, and turn it into a heat producing system that your budget will love. There are 4 simple things that you can do to turn your fireplace into the cost-effective heat sourse you are searching for. These definitely will make your present fireplace far more economical, and reduce your heating bills.

The first step is to remove your current damper and swap it for a top sealing damper. This style of damper is set up at the top of the chimney, and operates like a storm door. It helps prevent the inside air from getting out, and the outside air from coming into the house, and performs in hot or cold weather. It doesn't take a lot of time to install and you can get one online. An additional thing you will be able to do is fit a fire-back in the back part of your fireplace. It is manufactured from cast iron and it is used to improve the appearance of your fireplace while protecting the back wall from heat damage. The fire-back also soaks up heat coming from the fire and sends it back inside, making the fireplace more efficient.

Another method is to obtain a fireplace fan/heater, which draws in air in a room and warms it up. These heating devices are closed systems, so no smoke is discharged, and they can really make a difference in the temperature of your house. The final thing you're able to do is to fit glass doors, which might be a bit on the expensive side. If you do a bit of homework, you can find glass doors at a reasonable price and install them on your own. These doors create a screen between the chimney and living space, not only stopping the heat from escaping, but also affording some protection.

The guidance we've just given isn't all that challenging to implement, and all of the required products can be purchased online, or from your local stockist. Try your utmost to keep your fireplace efficient and see your heating bill plummet.

Fireplace Inserts

Upgrading conventional fireplaces with fireplace inserts is a sought-after option among householders in Kingswood. The objective of these inserts is to amplify the efficiency of a fireplace by decreasing heat loss and directing more heat into the room. Alongside a safer and more secure experience, these inserts offer a simpler and more convenient way to enjoy the atmosphere of a fire, without the mess and hassle of traditional wood-burning fireplaces.

Ranging from gas to electric and wood-burning models, there is a diverse selection of sizes and designs available for fireplace inserts. With minimal maintenance required, gas fireplace inserts are simple to use, while electric inserts offer convenience and adaptability with their remote control and adjustable settings. Wood-burning inserts are the best choice for householders who desire the genuine experience of a crackling fire and the aroma of burning wood.

Along with their efficiency and convenience, fireplace inserts are designed to be good for the environment. They decrease the amount of air pollution caused by traditional fireplaces by producing fewer emissions and burning fuel more efficiently.

A professional installation is essential for a safe and correct installation of a fireplace insert. Fireplace inserts are a wise investment for householders looking to increase the convenience, comfort, and value of their property, thanks to their numerous benefits. Enhancing home comfort and reducing heating bills can be achieved with fireplace inserts, which direct more heat into the room and reduce heat loss. It's important to note that different types of fireplace inserts may require different venting options. A professional consultation is essential for householders in Kingswood to determine the most suitable venting option for their specific fireplace insert, as well as for proper installation and safety measures.

Chimney Cowls

To maximise draft and stop smoke from backing up your chimney you can install a chimney cowl, which is a hood-shaped cover which fits over your chimney pot. It is generally made from galvanized iron and designed to stop the wind blowing smoke down the chimney. This should be an integral part of any fireplace in Kingswood. To enjoy the benefits of a fireplace fully, it is advised that you add a cowl to your chimney.

A chimney cowl can also help protect your dwelling and keep you secure. There are numerous forms of chimney cowls available, each has been developed to address different issues. Before you purchase one, consider a few aspects to make sure you get one that will help protect your house. When you know what you need, you can then pick out a chimney cowl based on your needs and budget.

One of the most common sorts of chimney cowl is referred to as the H-style. This pattern is the most effective at controlling the draught and allows your fireplace to function more efficiently. It is made from a series of H-shaped pipes that isolate the combustion gases from down draughts. It originally served marine applications, but has become popular among property owners because of its energy-saving attributes.

Another kind is the Aerodyne cowl. It works by drawing air into the chimney cowl and reducing downdraught. These are available in an assortment of colours. Its venturi shape draws air into the chimney cowl, creating a drop in air pressure that draws air upward from the fireplace or stove. Other types of chimney cowl include: bonnet chimney cowls, birdguards, revolving chimney cowls, aspirotor chimney cowls, anti-downdraught chimney cowls and static chimney cowls.

Chimney cowls are a quick way to prevent birds nesting in your chimney in Kingswood. They're reasonably priced and simple to put in. You should ensure you have clear access to the space above the chimney stack in order to install one effectively. It can also prevent debris from building up inside the chimney. (Tags: Chimney Cowl Installation Kingswood, Chimney Cowls Kingswood, Spinning Chimney Cowls Kingswood, Chimney Pot Cowls Kingswood).

Chimney Repair Kingswood

Both commercial and residential chimney systems in Kingswood need regular chimney repair to ensure efficiency, safety and functionality. The byproducts of combustion, weather elements, and temperature fluctuations can all contribute to the wear and tear of chimneys with the passage of time. These factors can cause a range of issues that need to be addressed promptly and by an expert.

Cracks in the chimney structure are a common problem that can lead to the need for chimney repair. These cracks can increase the risk of moisture penetration, which can lead to even more damage and affect the structural integrity of the chimney. In addition, the escape of dangerous gases, including carbon monoxide, from cracks in the chimney can pose serious health hazards to occupants.

The build-up of debris and creosote in the chimney flue is another problem that can often occur. Chimney fires and reduced efficiency are both risks associated with creosote accumulations. Frequent chimney cleaning as part of the repair procedure helps remove debris, soot and creosote, ensuring adequate airflow and reducing fire hazards. (71372 - Chimney Repairs Kingswood)

Kingswood Skip Hire

Skip Hire Kingswood

Home improvements, garden makeovers and even modest do-it-yourself projects are well known for the amount of waste that is produced and needs to be gotten rid of. According to your particular circumstances, fireplace installations will result in different amounts of waste. When you get your quotes you should ask if the waste removal has been included, otherwise you'll have to make arrangements to do this yourself.

If this task is left for you to do, you could think about hiring a skip. To match your exact requirements, you can choose from an array of skip sizes. You can select from a mini-skip, a midi-skip, a builders skip or a roll-on roll-off skip, or you could even go with the skip bag option.

To obtain a price for skip hire in Kingswood GO HERE.

Kingswood Fireplace Related Tasks

Fireplace Related Tasks Kingswood

You probably arrived here searching for basic fireplace installation, however your local Kingswood fireplace installer can provide a whole range of additional tasks, and these could include period fireplace installation, outdoor fireplace installation, fireplace replacement, fireplace cleaning, fireplace services, inglenook fireplace, double-sided stove installations, oak beam fireplaces, Victorian fireplaces, classic fireplaces, fireplace suites, modern gas fires, fire grate conversions, stone fireplaces in Kingswood, designer fireplaces, electric fire baskets, tiled fireplaces Kingswood, wood burning fireplace installations in Kingswood, Regency fireplaces Kingswood, carbon monoxide detector installation Kingswood, gas fireplaces Kingswood, fake fireplaces, the installation of chimney cowls, inset stove installation Kingswood, fireplace packages Kingswood, 3-sided fireplaces, contemporary fireplaces Kingswood, gas fireplace installations, brick fireplace installation, Victorian fireplaces Kingswood, fireplace design Kingswood, freestanding stoves Kingswood, wood burning fireplaces, fireplaces, chimney modifications, and more. In regards to what's available, this is by no means an all-embracing list of the services that are offered by your local fireplace installer. Kingswood providers will provide a full-blown list of their fireplace services on request. If there happen to be other Kingswood fireplace requirements that you are looking for but can't find here, you can easily list them on the QUOTE FORM provided.

Kingswood Fireplace Quotes

Fireplace Installers Near Kingswood

Also find: Hawkesbury Common fireplace installers, Didmarton fireplace installers, Cromhall fireplace installers, North Nibley fireplace installers, Synwell fireplace installers, Bournstream fireplace installers, Kingscote fireplace installers, Wickwar fireplace installers, Wootton-under-Edge fireplace installers, West End fireplace installers, Hillesley fireplace installers, Falfield fireplace installers, Bradley Green fireplace installers, Charfield fireplace installers, Wortley fireplace installers and more. It is possible to get fireplaces installed in practically all of these locations. To successfully install fireplaces in your home, these skilled tradesmen have the necessary know-how and experience. Residents can enjoy the comfort, warmth and ambiance that a fireplace brings to their living areas with the help and assistance of these dedicated professionals. Local homeowners can obtain fireplace installation quotations by simply clicking here. Get started with your fireplace installation today, without delay!

Fireplace Services Kingswood

Find a Fireplace Installer in Kingswood Here
Fireplace Installers in Kingswood Gloucestershire (0117)
  • Granite Fireplaces
  • Fireplace Repairs
  • Wood Burning Fireplace Installation
  • Victorian Fireplaces
  • Cast Iron Fireplace Installation
  • Fireplace Installation
  • Electric Fireplaces
  • Fireplace Installation Services
  • Corner Fireplaces
  • Gas Fireplaces
  • Fireplace Restoration
  • Brick Fireplaces
  • Fireplace Surrounds
  • Fireplace Installation Estimates
Gloucestershire Fireplace Installers Near Me Kingswood

More Kingswood Tradespeople: Home improvements in Kingswood frequently require the skills of many different tradespeople, and SKIP HIRE in Kingswood, a bricklayer in Kingswood, a carpenter/joiner in Kingswood, screeding in Kingswood, waste removal in Kingswood, roof cleaning in Kingswood, a blacksmith in Kingswood, a heating engineer in Kingswood, a chimney sweep in Kingswood, a stonemason in Kingswood, a painter/decorator in Kingswood, a plasterer in Kingswood, a roofer in Kingswood, brick cleaning in Kingswood, a damp proofing specialist in Kingswood, an electrician in Kingswood, a general builder in Kingswood, a handyman in Kingswood could be necessary although you are currently on the lookout for fireplace specialists in Kingswood, Gloucestershire. Click on the links to get quotes for all kinds of home improvement project.

If you're interested in local information regarding Kingswood, Gloucestershire look here

Fireplace installation in BS15 area, telephone code 0117.

TOP - Fireplaces Kingswood

Stone Fireplace Kingswood - Domestic Fireplaces Kingswood - Fireplace Ideas Kingswood - Fireplace Kingswood - Fireplace Fitters Kingswood - Fireplace Fitter Kingswood - Fireplaces Kingswood - Fireplace Installation Quotations Kingswood - Log Burner Fireplace Kingswood

HOME - FIREPLACES UK

(This fireplaces Kingswood page was updated on 23-05-2024)