Fireplaces Wilton

Fireplace Fitter Wilton Wiltshire (SP2): Fitting a brand new fireplace or opening up an old disused fireplace in your Wilton home is a great way to add a homely feel and some character to any room. The addition of a multi-fuel stove or open fire for those frosty winters' days can even prove more cost effective than some central heating systems, as long as you've got a ready source of timber. If used in combination with a back boiler it can provide you with a plentiful supply of steaming hot water in the process.

If you are going to build a safe, attractive and efficient fireplace in your house in Wilton, there are some vital things you must think about before you begin any work. The Part J building regulations for combustible appliances for starters, which applies to any work which is undertaken on flue linings, fireplaces, hearths and chimney breasts. If you reside in a listed building you will also have to find out if planning permission is required from the local authorities before any work is started.

PROFESSIONAL FIREPLACE INSTALLATION OR DIY?

A straightforward remodeling of a pre-existing fireplace can generally be achieved by a competent DIY enthusiast, however if any construction work is necessary there's the possibility of running into structural problems which will have to be addressed by a professional. It may be that so as to get a fire roaring in your fireplace once again you'll need little more than a quick clean up of the hearth and a sweep of the chimney. However, a stopped up flue and crumbling, old brickwork that requires structural reinforcement is what you will most likely discover.

Because of the severe health and fire risk issues that can result from an incorrectly fitted or renovated fireplace, it is advisable to benefit from the experience and knowledge of a competent fireplace fitter in Wilton. Making sure that sufficient oxygen is available for a fire to burn safely is a key part of the Building Regulations for fireplaces. If the airflow is not good enough then it's quite possible that a fire will not burn efficiently and cause a build-up of carbon monoxide fumes, which can be lethal.

A specialist fireplace installation technician will assess the circumstances and get past this problem and ensure a sufficient airflow for the fire to combust safely and efficiently, by installing vents around the room, or beneath the floors. To improve ventilation within blocked chimney flues, the fireplace installation engineer may also need to install some vents to stop condensed air being trapped and causing stains and damp areas.

BEFORE WORK BEGINS

Huge quantities of muck and soot will enter a room when you're having a disused fireplace opened up. Essentially, this is an incredibly messy job. It is good practice to remove any rugs, carpets and furniture from a room where you are planning to expose an old fireplace, to prevent them from being affected by dust, muck and soot that might be stirred up during the fireplace installation works. If you are installing a fireplace as part of an overall renovation project then it ought to be one of the initial things to be worked on after you have taken the room back to its bare floors and walls. By opening up a fireplace first you'll avoid any soot from the chimney causing damage to other phases of your project, such as wallpapered walls or fresh plaster.

STRUCTURAL & CONSTRUCTION WORK

With your fireplace opened up, it's time to find out what needs to be restored and to give the chimney and hearth a good clean. If this has not already been done, you can now get hold of a local Wilton chimney sweep. They will be able to provide you with professional guidance on the flue and chimney after sweeping, as to the condition of the structure of the chimney and if you need to replace the existing flue liner.

Construction work could be essential to reinforce the existing chimney breast and chimney, and a new flue lining might also have to be put in. All this work must adhere to the latest Building Regulations which are there for your own safety. This is not going to be the sort of work that you can do yourself, therefore you will need to hire a competent builder or fireplace installer who has experience in good construction practices and an understanding of the relevant Building Regs.

If the dimensions of the original fireplace are bigger than your needs, a concrete lintel must be put in. As soon as your concrete lintel is safely in place you may now proceed with the repair, upgrade and installation of the fireplace's hearth. You may find your existing hearth has been sunken into a void in the floor, but to abide by current regulations it is required to be raised above normal floor level. You'll find that there's a huge selection of ready to fit hearths in concrete, granite or marble, but if you have a non-standard sized fireplace you might have to go for a bespoke hearth, which you can ask your Wilton fireplace builder about.

FIREPLACE STYLES

A trip to a fireplace showroom or a browse online will show the alternatives available for the different fireplace designs and styles. It is crucial to listen to the professional advice of the salespeople, because all fireplaces will not necessarily be suited to your specific chimney and flue.

Whether you go for a multi-fuel stove, a wood burner or an open fireplace will be determined by the all round style you are attempting to develop, your existing decor and perhaps even, your home's age. If you're lucky enough to have a home with an inglenook fireplace for instance, this is a perfect position for a cast iron wood-burner stove. This won't only deflect the heat back into the room, but will also put the focus on the charm and beauty of the stove.

You've still got possibilities for a fireplace feature by installing a multi-fuel stove or a wood burner, even if your Wilton home hasn't got a chimney breast. Since a flue can be channeled through an exterior wall and doesn't need an existing chimney, it's still possible to install and enjoy this form of fireplace.

OPEN, GAS, MULTI-FUEL, WOOD OR ELECTRIC FIREPLACE?

If this style of fireplace is not appropriate for your Wilton home, what other choices are out there?

Wood Burning Stoves - Even the smallest room in Wilton can benefit from the fitting of a wood burning stove, which can be found in a variety of designs, and, if necessary, can even be installed as a free standing feature. An additional benefit of these products is that they can provide steaming hot water for personal use, or provide heating in another area via a radiator, when combined with a back boiler.

Electric Fireplaces - An obvious choice for many homeowners in Wilton, these fires can be fitted by more or less any capable person, easily and safely. They can be inset into traditional fireplaces, and with the "real" looking feel of some electric fires it can sometimes be difficult to distinguish from the genuine thing.

Open Fireplaces - Having the capability to burn almost any solid fuel on the market, the open fireplace can create a flickering fire as an eye-catching focal point for a room or living area. Contemporary fireplaces are no longer the inefficient, draughty and smoky features that they were in the past, and an open fire creates a warm, toasty environment for the enjoyment of its occupants.

Gas Fireplaces - More thermally efficient than wood burner stoves, gas fires come in an assortment of styles to complement your home in Wilton. Must be professionally fitted and maintained by a Gas Safe registered tradesman.

Multi-Fuel Stoves - As you will probably gather from the name, these stoves can run on various different fuels, including gas, oil, wood or smokeless coal, and not only that, they can also create a unique focal point for your living space. The AGA range for instance is renowned as being capable of providing heat for the entire home, a supply of hot water and an oven and hob all in a single unit.

Fireplace installation work can be carried out in Wilton and also in: Netherhampton, Great Wishford, Quidhampton, Coombe Bissett, Compton Chamberlayne, Fugglestone St Peter, Burcombe, Little Wishford, Chilhampton, Stratford Tony, Little Durnford, Baverstock, Stoke Farthing, Little Langford, Barford St Martin, as well as in these postcodes SP2 0LP, SP2 0FF, SP2 0JP, SP2 0FJ, , SP2 0LZ, SP2 0DU, SP2 0JG, SP2 0FH, and SP2 0EB. Locally based Wilton fireplace services will probably have the dialling code 01722 and the postcode SP2. Wilton property owners are spoilt for choice when looking for fireplace installers. Clicking on the "quote" banner will enable you to get fireplaces details for your area.

Improve the Efficiency of Your Open Fireplace in Wilton

The classic fireplace may have lost some of its allure due to worries about the environment but it is still favoured by many in Wilton. The natural ambiance of an open fireplace stimulates special remembrances for those who've got them. Having an open fireplace has its many perks and benefits but there are also a couple of downsides which could affect its usefulness. With energy costs increasing significantly annually, your fireplace must give out heat in a cost-effective way. When you've got a fire roaring in the fireplace, it can actually remove warm air out of the room, making your heater work harder. Anytime there's no fire, a damper ought to manage the airflow. Unfortunately, dampers often have an inefficient seal, so cool air gets in, and warm air can get out.

What many people in Wilton tend not to know about their fireplace is that it doesn't necessarily do what they believe it is doing. Instead of preserving resources, and heating costs, it can often be adding hundreds of pounds of energy costs. However it's not all gloom and doom seeing that there are techniques for making your fireplace very cost-efficient. There are at least four basic points that you can do to improve your fireplace. You will recognize that these guidelines will help to make your fireplace generate quality heat and your energy bill a bit lower.

The 1st thing that has to be done is to replace the damper with a top sealing damper. This kind of damper is installed at the top of the chimney, and works like a storm door. It does a good job of keeping warm air in the house during winter months and cool air from escaping in the summer months. The product is simple to install, and can be bought on the web. An additional thing you could choose to do is install a fire-back in the back part of your fireplace. This is a cast iron plate that is intended to enhance the room design, while protecting the back wall from being damaged by the fire. The fire-back basically heats up from the flames and reflects the heat back into a room, hence improving the overall efficiency of the fireplace.

Another way to save money is by using a fireplace heater/fan, which heats the area by drawing the air into a heat chamber and returning the air back into the room. These heaters are sealed systems, hence no smoke is released, and they can really make a difference in the temperature of your home. Last but not least, it is possible to put in glass doors which will likely be the most costly option. Browsing around, you should be able to locate a good deal, and with instructions, you could possibly put them in on your own. These doors help to keep the heat from getting away and additionally it keeps pets and young ones from being burned.

The advice we just presented isn't difficult to put into action, and most of the items you need can be readily purchased online. Take care of your fireplace and watch your energy costs fall.

Natural Stone Fireplaces

For that really dramatic look why don't you think about bringing the outdoors inside with a natural stone fireplace? It's possible your property already has some exterior stone features, a stone facade or a boundary wall for example. You could build a feature on the inside that complements those on the outside.

Depending on your taste and budget, you can create a natural stone fireplace with either full-depth stone or stone cladding. Also, sandstone, slate, limestone, granite, marble or quartz, are amongst the different types of stone that can be used to construct a fireplace.

The look of your finished fireplace will be affected by the style of building (dry stone or mortar built), the individuality of the stonemason or tradesman who builds it and the type of stone which is used. Choose a style and design that you like, and show the fireplace builder some photographs before they start the job.

Since it has such a striking presence and can dominate the appearance of a room, stone isn't always suitable for a modern home. But, spectacular could be precisely what you are looking for - and at the end of the day, the choice is down to you!

Wilton Fireplace Related Tasks

Your local Wilton fireplace fitter can deliver a wide range of services and tasks, and together with what's previously been covered here they will be able to do hearth-mounted electric fires in Wilton, designer fireplaces Wilton, open fireplaces, bespoke fireplaces Wilton, chimney strengthening Wilton, fireplace installation, chimney lining, reclaimed fireplaces Wilton, gas fireplaces, Victorian fireplaces Wilton, traditional fireplaces Wilton, built-in gas fires, fireplace fitting, Regency fireplaces Wilton, fake fireplace installations, contemporary fireplaces Wilton, fireplace repairs, tiled fireplaces Wilton, fireplace design, fireplace packages Wilton, fireplacequotes, marble fireplace surrounds Wilton, fireplace removal, fireplace hearths in Wilton, outdoor fireplaces Wilton, electric fireplaces, fireplace mantels in Wilton, 2-sided fireplaces, fireplace suites, inglenook fireplace, chimney repairs, wood burning fireplaces, stone fireplace installation, chimney sweeping, fireplace services in Wilton, to mention a few. This is merely a sample of what can be done by your local fireplace fitter. Wilton specialists operating in the area will will be glad to tell you about the entire range of fireplace services that are on offer. If you have fireplace requirements in Wilton, that you can't see here, you should go HERE and fill out the quote form provided.

Friends & Family

It's invariably a great help to ask if family and friends have any recommendations when trying to find a professional contractor for your project or undertaking in Wilton. Along with pointing a finger at bad contractors and companies with a dismal track record, person to person references are usually the best way to single out someone who's perfect for your requirements.

Getting this sort of testimonial from a friend or family member will also give you a good idea about the contractor's timekeeping and reliability, and if things went pear-shaped, how they were dealt with and how rapidly they were rectified. They should also be able to advise you how close the original quote was when compared to the eventual price, which, unless they've got a guaranteed price promise, is normally difficult to obtain from the contractors themselves.

Seeing as your friends and family members are folks that you know and can depend on in regards to their advice, they should be your first port of call. It is likely that they've had a disappointing experience, if they are reluctant to discuss a specific contractor or company. It's generally the case that most people will be more than happy to speak about a decent quality contractor and less likely to discuss a poor one. They might even suggest a different company, rather than 'bad mouth' a far from ideal one they've dealt with.

Fireplace Installation Information and Advice

Find out more about about the health effects of fireplaces, the evolution of fireplaces, the heating efficiency of fireplaces, the various types of fireplaces, coal burning fireplaces and the environmental effects of fireplaces, have a look at Wikipedia (here). See a YouTube video clip on do-it-yourself fireplace installation here. To understand the social media response to fireplace developments and trends, check this out. By looking on the internet you will be able to locate numerous invaluable articles on the subject of fireplace installation, fireplace decoration and fireplace designs - we just found this engaging one on fireplace design ideas head here. Fireplace Installation guidance and advice is easily accessible from online forums, so to take advantage of this you need to pop along to the popular Buildhub Forum, topics under discussion include trims for stoves, chimney design, pellet stoves and boilers, building regulations, log burners and widening a fireplace.

Fireplace Installers Near Wilton

Also find: Burcombe fireplace installers, Coombe Bissett fireplace installers, Quidhampton fireplace installers, Little Durnford fireplace installers, Compton Chamberlayne fireplace installers, Netherhampton fireplace installers, Stoke Farthing fireplace installers, Fugglestone St Peter fireplace installers, Barford St Martin fireplace installers, Little Wishford fireplace installers, Chilhampton fireplace installers, Great Wishford fireplace installers, Baverstock fireplace installers, Little Langford fireplace installers, Stratford Tony fireplace installers and more. Fireplace installation services are widely available in almost all of these areas. With the requisite know-how and experience, these versatile tradespeople are adept at successfully installing fireplaces in your property. With the help of these dedicated experts, residents can enjoy the comfort, ambiance and warmth that a fireplace brings to their homes. By simply clicking here, local homeowners can get fireplace installation quotes.

If you're interested in local Wilton info take a look here

Fireplace installation in SP2 area, telephone code 01722.

Fireplace Fitter Wilton - Fireplace Installation Estimates Wilton - Domestic Fireplaces Wilton - Log Burner Fireplaces Wilton - Fireplace Fitters Wilton - Fireplace Installation Services Wilton - Fireplace Installers Wilton - Fireplace Installers Near Me - Fireplace Wilton