Fireplace Fitter Melbourne Derbyshire (DE73): Fitting a new fireplace or re-opening a disused fireplace in your Melbourne property is a good way to add a homely feel and a bit of charm to any room. Nippy winters' evenings can become a pleasure as you relax in front of your fireplace listening to the crackle of a burning fire, and if your fire is used in combination with a back boiler you can also benefit from cheap hot water as well.
However before you start bashing down the walls of a bricked-up fireplace there are some important considerations you must bear in mind to achieve a safe and efficient fireplace. Any work that is carried out on your chimney breast, flue lining, fireplace and hearth must comply with the United Kingdom's Building Regulations, Part J for combustible appliances. Planning permission may also be necessary before work begins if your property is in a conservation area or is a listed building.
DIY OR PROFESSIONAL FIREPLACE INSTALLATION?
A basic remodeling of a current fireplace can generally be achieved by a skilled DIY enthusiast, however if any building work is required there's a possibility of encountering structural issues that will have to be handled professionally. It may be the case that when you remove the covering from an old fireplace to find a hidden gem which requires little more than a good clean up and a call to a chimney sweep to get a fire roaring once again. However, what you'll more likely discover is a pile of old, crumbling bricks that hides problems such as a lintel that needs to be replaced or a blocked up chimney.
A wrongly fitted fireplace can cause serious fire risk and respiratory health problems and, as such, should only be fitted by a professional fireplace installer in Melbourne with the experience and knowledge to do the job effectively. A key part of the Building Regulations for fireplaces is that sufficient oxygen is available for a fire to burn efficiently and properly. Toxic carbon monoxide can soon build up from a fire burning inefficiently in an inadequately ventilated space.
To safely overcome any airflow problems, vents may need to be installed in the room as part of a fireplace installation, to guarantee suitable levels of oxygen are able to reach the fire. They may have to fit vents into unused chimney flues which can trap moist air and result in damp spots and staining to your chimney breast.
BEFORE WORK STARTS
It is astonishing how much dirt and soot can build up inside an old chimney and fireplace and you won't know what's there until you uncover it. A decent Melbourne fireplace installer will bring dust sheets for your furniture and supply some form of protection, however it's sensible where feasible to remove carpets and furniture from the area before any work starts. If you are fortunate enough to be working on a full home renovation project then it should be one of the initial jobs to focus on before re-plastering and decorating the walls. This should help to prevent any harm by soot and other chimney dirt to any completed work.
STRUCTURAL & CONSTRUCTION WORK
With the fireplace uncovered, it is time to see what is in a fit state to be renovated and give the chimney and hearth a comprehensive clean. Bringing in a chimney sweep to de-soot your chimney will be one of the first items on your agenda. They'll not only make certain that your chimney and flue are completely clean, but they can additionally assess the state of the chimney and flue liner and provide guidance about whether you need to upgrade any section of the chimney and flu, such as the flue liner.
After a chimney sweep assessment it may be necessary to strengthen the chimney breast or install a new flue liner as set out in Part J of the Building Regulations. This kind of work needs to be completed by a skilled tradesperson with experience of the appropriate building regulations and good construction practices.
If the size of the original fireplace is greater than your requirements, a concrete supporting lintel will need to be installed. When you've supported your fireplace with a new lintel it is now possible to upgrade or renovate the hearth. If the existing hearth is sunken into the floor you will need to raise it to observe the latest building regs. Off-the-shelf solutions from marble, concrete or slate are available on the market to achieve this, or your fireplace fitter in Melbourne might be able to offer a bespoke, made to measure hearth to complement the style of your room.
STYLES OF FIREPLACE
Choosing your perfect fireplace can be difficult amongst the various styles and designs available from an online dealer or fireplace showroom. Every fireplace might not be suitable for your flue and chimney therefore it's sensible to accept any advice and help from your fireplace installers regarding your specific situation.
You home's age, and the style you're trying to establish for your room, will all help you decide upon the type and design of fireplace which is most suitable for you. As an example, an attractive inglenook fireplace can be an ideal backdrop for a traditional cast iron wood-burner stove, highlighting its character and reflecting heat back into the room.
If your Melbourne home doesn't have a chimney breast you've still got the option of a fireplace feature through the installation of a multi-fuel or wood burning stove. As long as you have an external wall through which a flue from the stove can be channeled, you do not need a chimney structure in place to experience a "real" fire.
MULTI-FUEL, ELECTRIC, GAS, OPEN OR WOOD FIREPLACE?
The charm and look of a "real" fire can't be surpassed, but what options are out there if this sort of fireplace is not possible within your Melbourne property?
Wood Burning Stoves - Wood burners have become "the in thing" in many homes in Melbourne, and can have classic or modern styling to suit your decor. An integrated back boiler is an added benefit and could provide steaming hot water for use around the home, or for heating in another area via a radiator.
Electric Fireplaces - Electric fireplaces can be fitted safely and easily by any competent individual and there are designs and styles which are suitable for just about any room and home in Melbourne. Even if your room has a conventional fireplace, an electric fire can be fitted that looks almost like a real fire with dancing flames.
Multi-Fuel Stoves - Provides you with options to use gas, oil, wood and coal to deliver a versatile stove for any house in Melbourne. The AGA style is renowned as being capable of providing heating for an entire home, a supply of hot water and a cooker all in one useful appliance.
Open Fireplaces - A flickering fire is a focus for any room in your home and it has the ability to burn almost any solid fuel that you can buy. In the past an open fire might have had the reputation of being draughty, inefficient and smoky, but a skillfully fitted contemporary fireplace is a delight to the eye whilst reclining in the warm glow it provides.
Gas Fireplaces - Gas fireplaces are available in a variety of designs to suit your home and are typically more thermally efficient than wood burning stoves. Gas fireplaces can only be maintained and fitted by a qualified Gas Safe registered technician, (formerly CORGI registered).
Fireplace installations are available in Melbourne and also in nearby places like: Castle Donington, Breedon-on-the-Hill, Weston-on-Trent, Wilson, Stanton by Bridge, Kings Newton, Ingleby, Ticknall, Lount, Ashby-de-la-Zouch, Diseworth, Swarkestone, Isley Walton, Newbold Coleorton, and in these postcodes DE73 8LN, DE73 8FP, DE73 8GH, DE73 8FJ, DE73 8JY, DE73 8GL, DE73 8JQ, DE73 8ET, DE73 8HX, DE73 8FF. Local Melbourne fireplace specialists will probably have the postcode DE73 and the telephone dialling code 01332. Checking this out will make certain that you access local tradespeople installing fireplaces. Melbourne home and business owners are able to utilise these and numerous other fireplace related services.
Chimney Sweeping Melbourne
If you've got an open fire or a stove in your house in Melbourne, the regular sweeping of your chimney is essential. To be totally safe, it's wise to sweep and clean your chimney two times per year, particularly if you are burning wood or bituminous coal.
You could sweep your own chimney, if you've got the appropriate tools, but this is a filthy job and is best left to a qualified Melbourne chimney sweep if you want it to be done correctly and cleanly. There are added benefits to calling in a professional, because if there are any safety issues with your chimney, the chimney sweep is in a position to spot them.
Failure to sweep your chimney in Melbourne could result in a build-up of ash, soot and wood tar which can cause chimney fires. Blocked chimneys can also cause another dangerous situation by drawing poisonous carbon monoxide fumes back into your home.
This all adds up to the fact that you should always hire a qualified Melbourne chimney sweep, and one who has good public liability cover in case of any accidents. GO HERE to get a chimney sweeps quote in Melbourne. You can also obtain chimney sweeps in Castle Donington, Breedon-on-the-Hill, Weston-on-Trent, Wilson, Stanton by Bridge, Kings Newton, Ingleby, Ticknall, Lount, Ashby-de-la-Zouch, Diseworth, Swarkestone, Isley Walton, Newbold Coleorton, and and of course in Melbourne.
An essential part of your chimney set-up, a chimney liner or flu liner improves the safety of your chimney while enabling it to perform more efficiently than it would otherwise. Crafted from ceramic material, metal or clay, flue liners are ducts which are fitted to the inside of chimneys to transport toxic fumes to the outside. Some chimneys in older properties in Melbourne may not even be fitted with a flue liner, or if the existing liner is compromised, may need to be relined.
Your chimney flue can, in time, be impaired by the dangerous gases and fumes that are produced by burning a fire. Make certain that your fireplace specialist checks the flue lining for potential issues and damage. You need to stop those hazardous gases from leaking into your home's living space, which is exactly what can come about when a flue lining is faulty. There is an additional hazard with broken flue linings, in that they may permit extreme heat to pass into the chimney's structure, which could contribute to fires.
How To Keep Your Fireplace And Reduce Your Heating Bills
Along with concerns over the environment, the traditional fireplace has lost some of its charm, but it is still a favourite with many property owners in Melbourne. There is nothing like feeling the genuine warmth of a fireplace on a chilly winter evening. There are numerous benefits to having a fireplace but there are some drawbacks that might need to be taken care of. Due to power costs elevating so swiftly these days, your fireplace needs to be a reliable source of heat, not one of inefficiency. While having a fire alight in a fireplace keeps those around it warm, it actually removes warm air from the rest of the space, causing your heater to work harder. In case you do not have a fire lit, the damper is designed to keep heat in. However, dampers are usually not terribly successful seals, therefore a lot of the warm air escapes and enables cold air to enter the home.
Many property owners in Melbourne with a fireplace don't know how it can impact the cost of heating their home. Instead of warming a house naturally, a fireplace can actually add 100s of pounds to your heating bills. You will find there's a way to take your less than efficient fireplace, and turn it into a heat generating system that your budget will love. There are at least four easy elements that you can do to improve your fireplace. You will appreciate that these suggestions will help make your fireplace create quality heat and your current energy bill lower.
The 1st thing that has to be done is to replace the damper with a top sealing damper. This form of damper is set up at the top end of the chimney, and operates like a storm door. It will keep the outside air from coming in, and the inside air from getting out, and works in cold or hot weather. The product is simple to set up, and can be purchased on the web. An additional thing you will be able to do is position a fire-back in the back part of your fireplace. This is a cast iron plate which is intended to add to the room decor, while shielding the back wall from damage by the heat. The fire-back actually heats up from the flames and sends the heat back into the room, consequently enhancing the fireplace's efficiency.
Another means to cut down on fuel bills is to use a fireplace fan/heater, which heats the area by drawing the air into a heat chamber and returning the air back into the room. These heating devices are sealed systems, hence no smoke is emitted, and they really can make a difference in the temperature of your home. The fourth thing that can be done is to fix glass doors, which could be your biggest expense. Browsing around, you will be able to locate a bargain, and with an instruction manual, you can put them in yourself. Such doors create a screen between the hearth and living space, not only stopping the heat from escaping, but also offering protection.
All of these tips are straightforward to do, and the products can be found on the internet. Retain your fireplace and decrease heating expenses by increasing it's efficiency.
Melbourne Fireplace Related Tasks
There is a wide range of work that can be undertaken by your local Melbourne fireplace installer including multifuel stoves, Victorian fireplaces Melbourne, fake fireplace installation in Melbourne, fireplace refurbishment, wood burning fireplaces, inset stove installation in Melbourne, fire grate conversions, flue lining, marble fireplace surrounds in Melbourne, the installation of chimney cowls Melbourne, cast iron fireplaces, fireplace mantels Melbourne, fireplace fitting, period fireplaces in Melbourne, 2-sided fireplaces, Victorian fireplace installation, wood burning stoves, double-sided stoves in Melbourne, marble fireplaces, fireplace cleaning, open fireplaces in Melbourne, modern fireplace in Melbourne, traditional fireplaces in Melbourne, fireplace services, chimney sweeping, fireplace inserts Melbourne, chimney strengthening in Melbourne, electric fireplace installations, fake fireplaces in Melbourne, brick fireplaces in Melbourne, fireplace replacement, fireplacerates Melbourne, three-sided fireplaces, cast iron fireplace installation, made-to-measure fireplaces in Melbourne, and lots more. Listed are just a small portion of the duties that are carried out by people fitting fireplaces. Melbourne providers will tell you about their full range of fireplace related services.
Information, Help and Social Media
To become part of the world of fireplace installation head over to a fireplace installation forum, discussion threads include things like understanding building regulations, pellet boilers and stoves, chimney flues, widening fireplaces, stove vents and wood burning stoves. If you'd like to find out more information on about fireplace designs check this out. The dedicated Wikipedia "fireplace" page is the place to head for details on the environmental effects of fireplaces, fireplace heating efficiency, the various types of fireplace, the evolution of fireplaces, coal burning fireplaces and the health effects of fireplaces. To find out what's happening on social websites, check this out. By studying You Tube videos like this it is possible to discover how to install a recessed electric wall mounted fireplace.
Fireplace Installers Near Melbourne
Also here.: Wilson fireplace installers, Swarkestone fireplace installers, Lount fireplace installers, Stanton by Bridge fireplace installers, Newbold Coleorton fireplace installers, Diseworth fireplace installers, Ingleby fireplace installers, Weston-on-Trent fireplace installers, Isley Walton fireplace installers, Breedon-on-the-Hill fireplace installers, Ashby-de-la-Zouch fireplace installers, Castle Donington fireplace installers, Ticknall fireplace installers, Kings Newton and more. All of these areas are catered for by tradesmen fitting fireplaces. Melbourne business and home owners can get estimates by going
Fireplaces Around Melbourne: Over the past twelve months fireplaces were professionally installed in these Melbourne streets: Riding Bank, Selina Street, Calke Road, Washington Close, Cockshut Lane, Hall Leys Lane, Castle Lane, Huntingdon Court, Castle Street, Station Road, Salisbury Lane, Melton Avenue, Castle Mews, Sweet Leys Way, Commerce Street, Woodlands Way, Quick Close, Victoria Street, Pool Road, High Street, and in these Derbyshire postcodes: DE73 8LN, DE73 8FP, DE73 8GH, DE73 8FJ, DE73 8JY, DE73 8GL, DE73 8JQ, DE73 8ET, DE73 8HX, DE73 8FF. Work was accomplished in these areas by installers of fireplaces. Melbourne home and property owners received competent and professional fireplace services in all cases.
To get local Melbourne info look here
More Derbyshire Fireplace Fitters: More Melbourne, Pinxton, Belper, Heanor, Dronfield, Ashbourne, Glossop, Borrowash, Sawley, Whaley Bridge, Chapel-en-le-Frith, Wingerworth, Sandiacre, Long Eaton, Ripley, Darley Dale, South Normanton, Ilkeston, Staveley, Brimington, Eckington, Swadlincote, Somercotes, Alfreton, Chesterfield, Wirksworth, Hadfield, New Mills, Matlock, Shirebrook, Swanwick, Clay Cross, Clowne, Ockbrook, Scarcliffe, Buxton, Derby, North Wingfield, Killamarsh and Bolsover.:
Fireplace installation in DE73 area, telephone code 01332.
Fireplace Installation Quotations Melbourne - Fireplace Melbourne - Fireplace Installation Services Melbourne - Fireplace Installers Melbourne - Marble Fireplace Melbourne - 01332 - Gas Fireplace Melbourne - Fireplace Fitters Melbourne - DE73