Fireplace Fitter Burntwood Staffordshire (WS7): Fitting a new fireplace or opening up a disused fireplace in your Burntwood home is an effective way to add a homely feel and some character to any room. Chilly winter evenings can become very enjoyable as you sit back in front of your new fireplace surrounded by the crackling of firewood, and if your fire is combined with a back boiler you can also enjoy cheap hot water as well.
Before you begin chipping away at a bricked-up chimney there are some things you will need to do to make sure you can install your new fireplace in an efficient and safe way. All work must observe Part J of the Building Regulations, which addresses the installation and construction of flue linings, fireplaces, chimney breasts and hearths of any combustible appliance. Planning permission may also have to be sought before work commences if your property is listed or in a conservation area.
PROFESSIONAL OR DIY FIREPLACE INSTALLATION?
If you're a competent and keen DIYer it may be quite possible to refurbish a blocked up fireplace, however the likelihood of encountering structural problems in the majority of cases is regrettably high. If you are lucky when you open up a blocked up fireplace you might find a decent chimney breast, hearth and lintel that involves little more than the services and advice of a chimney sweep to get a toasty fire going. However, what you will most likely find is an area of old, crumbling bricks that hides problems such as a blocked chimney or a lintel that needs replacing.
Due to the severe health and fire risk issues that can result from an incorrectly installed or restored fireplace, it is better to avail yourself of the knowledge and experience of a specialist fireplace installer in Burntwood. As is stated in Part J of the Building Regulations for fireplaces, the airflow in a room must be adequate where there's a fireplace, because in order to burn safely, the right volume of oxygen is required. Not enough oxygen means the fire will not burn well, and carbon monoxide could accumulate, which can lead to injury or death.
To overcome this issue a professional Burntwood fireplace installer will consider the situation and install vents around the room, or underneath the flooring, to ensure a sufficient airflow for the fire to burn efficiently and safely. To prevent condensed air from becoming trapped in blocked off or unused chimney flues and causing staining and damp spots, vents may have to be installed by the installation team to introduce some airflow.
BEFORE WORK COMMENCES
A huge amount of dirt and soot can be discharged from an old fireplace upon reopening it for restoration. A thoughtful Burntwood fireplace installer will bring dust sheets to cover up your home furnishings and provide some form of protection, however it's sensible where feasible to remove furniture and carpets from the room before any work begins. If you are installing a fireplace as part of an overall renovation then it ought to be one of the first things to be done after you have taken the room back to bare floors and walls. This will help to avoid any discolouration damage by dirt and chimney soot to any completed renovation work.
CONSTRUCTION & STRUCTURAL WORK
Once you have revealed your old fireplace you'll have a better idea of what work needs to be done, and also be in a position to thoroughly sweep the chimney and clean any sections of hearth that may have been left in place. You now ought to get hold of your chimney sweep, if you haven't already done so, to come and clean the old chimney and fireplace. A chimney sweep will firstly clean the flue and while doing this will check the structural condition of the chimney and offer guidance on whether a new flue liner is necessary.
It may be essential to put in a new flue liner to conform to the Building Regulations, and work might also be required to strengthen the existing chimney and chimney breast. These are projects that need to be done by a skilled craftsman with a knowledge of the appropriate building regs and quality construction skills.
In older buildings you might discover the original fireplace is too large for your needs, in which case a supporting concrete lintel will be necessary to adapt the opening. Once this has been done the next step for your Burntwood fireplace installation will be to modernise the hearth. You might discover that your existing hearth has been sunken into the floor, however to be in accordance with latest building regulations it must be raised above floor level. Off-the-shelf solutions from marble, concrete or slate are available to accomplish this, or your fireplace builder in Burntwood might be able to provide you with a bespoke, made to measure hearth to fit in with the style of your room.
STYLES OF FIREPLACE
Deciding on your choice of fireplace can be tricky amongst the different designs, shapes and sizes available from a fireplace showroom or online outlet. Every fireplace might not be suitable for your existing chimney and flue therefore it is sensible to accept any guidance and advice from your sales and installation team regarding your particular circumstances.
Certain homes and rooms will look better with an open fireplace than a multi-fuel stove or a wood burner and vice versa. If you have an old-fashioned inglenook fireplace, a wood burning stove can look amazing in this surrounding, and has the added benefit of deflecting heat into the room from the stone or brick walls surrounding the stove.
Even if you haven't got a pre-existing chimney breast in your Burntwood property, it is still entirely possible to put in a wood burning or multi fuel stove. A chimney isn't needed in this instance because the flue is taken straight from the top or rear of the stove and taken out through an external wall.
GAS, MULTI-FUEL, WOOD, ELECTRIC OR OPEN FIREPLACE?
A flickering fire on a cold evening creates a charm and ambience that simply cannot be beaten, but what are the other options available to fit in your brand new fireplace in Burntwood?
Electric Fireplaces - Electric fireplaces can be fitted safely and easily by any competent person and there are styles that are suitable for almost any room and type of home in Burntwood. Even if your home has a traditional fireplace, an electric fire can be fitted that looks almost like a "real" fire with an authentic flame effect.
Open Fireplaces - Provides an eye-catching focal point for any room and can be used with a variety of solid fuels. A professionally installed contemporary open fire is a far cry from the smoky old fireplace that was perhaps boarded up by earlier owners, and its glowing charm is a welcome addition to any property in Burntwood.
Multi-Fuel Stoves - Multi-fuel stoves provide you with the option of using oil, coal, wood and gas to furnish you with a multi-purpose stove for any house in Burntwood. They can be used not simply for heating a single room, but some types like the AGA range, can provide useful cooking areas, supply hot water and can be used to heat the complete property if plumbed into an existing radiator network.
Wood Burning Stoves - These have become extremely popular in a lot of homes in Burntwood, and can have classic or modern styling to suit your decor. If fitted with a back boiler can provide hot water to heat radiators or for other use in your home.
Gas Fireplaces - There are a variety of designs to suit all property types and their effectiveness in warming a room is better than wood burning stoves or open fireplaces. Gas fireplaces can only be maintained and fitted by a certified Gas Safe registered engineer, (Gas Safe replaced CORGI registration in 2009).
You should be able to find fireplace fitters in Burntwood, and adjacent places like: Wimblebury, Clayhanger, Pipehill, Chase Terrace, Woodhouses, Burntwood Green, Little Norton, Hammerwich, Longdon, Chasetown. Areas with postcodes like WS7 1JW, WS7 1JR, WS7 0BH, WS7 0DU, WS7 0EP, WS7 0ED, WS11 9QE, WS13 8BZ, WS7 1NP, and WS7 0AY can also be covered. If a fireplace fitter has the postcode WS7 and the dialling code 01543, it is probable that they hail from the Burntwood area. This is just one of the things to check if you wish to make certain that you hire a locally based fireplace specialist. Burntwood residents have lots of choices when they're looking for fireplace services.
Chimney Cowls Burntwood
A chimney cowl is a hood-shaped covering for your chimney pot that adds draft and prevents backflow. It is usually made of galvanized iron and fits over the chimney pot to keep the wind from blowing smoke back down. It is an essential component for any chimney in Burntwood. It can be bought online or in a hardware store. Whether you choose to purchase a new one or make an existing one work better, a cowl will keep your fireplace or stove working efficiently.
There are several types of chimney cowls available. There are pot hanging cowls that can be installed without removing the chimney pot. They connect to the flue liner via three straps, which secure the cowl in place. Another type of cowl is a weathering cap, which is attached to the end of the flue system. It is larger than the chimney pot, which ensures that it stays in place.
You can also find chimney cowls made from everyday objects, like a steel bucket or stainless steel colander. Chicken wire can also be used to make a cowl. Clay flower pots also make good chimney cowls. These covers can be purchased at a local hardware store or online.
Chimney cowls are a simple way to prevent birds from nesting in your chimney in Burntwood. They are inexpensive and easy to install. You should make sure you have easy access to the area above the chimney to install one. It can also prevent debris from accumulating inside the chimney.
Carbon Monoxide Detector Installation Burntwood
Don't neglect the importance of carbon monoxide detectors near fireplaces - they're key to keeping your home safe. Though they offer comfort and warmth, fireplaces can emit carbon monoxide if they are not correctly ventilated. Installed in the same room as the fireplace, a detector can alert occupants to the presence of this deadly, colourless, and odourless gas.
The process of installing carbon monoxide detectors is easy, but it must be carried out correctly. Detectors should be mounted on the ceiling or wall according to the manufacturer's instructions, ideally at least fifteen feet from the fireplace to avoid false alarms. Regular testing and annual battery replacements are vital for ensuring your detector functions properly.
By ensuring the device is correctly positioned and operational, the professional installation of carbon monoxide detectors provides peace of mind. By taking this precaution, homeowners can significantly reduce the risk of carbon monoxide poisoning, protecting their loved ones and enhancing the safety of their living spaces. Regular maintenance of the fireplace and the detector is essential for ongoing protection. (Carbon Monoxide Detector Installation Burntwood)
Log Burner Fireplaces Burntwood
Log burner fireplaces, also called wood-burning stoves, have become a popular choice among Burntwood property owners seeking both practical heating solutions and visual appeal. Adding a rustic and charming touch, these fireplaces ensure a cosy and snug atmosphere in any building during the colder months. Beyond their aesthetic appeal, log burners are exceptionally efficient, delivering considerable warmth at relatively inexpensive fuel costs. The mix of functionality and beauty makes these stoves an appealing addition to various living areas.
However, the addition of a log burner fireplace requires careful thought regarding its installation. Initially, it's important to decide on the suitable size and model that meet the particular needs of your property. Aspects such as ventilation, room size and insulation quality, and ventilation need to be considered. It is strongly advised to prioritise a professional installation, as this ensures that the stove is installed safely and adheres to local building codes. Not only does correct installation assure optimal performance, but it also decreases the dangers of hazards like chimney fires or carbon monoxide leaks.
A crucial part of having a log-burning fireplace is its maintenance. Routine cleaning of both the chimney and the stove is important to prevent creosote, a flammable substance that results from burning wood, from building up. Annual inspections by accredited experts are advisable to ensure the system remains in good working order. Ensuring the longevity and safety of their log burner fireplaces, property owners in Burntwood can also savour the cosy ambiance and warmth by following these maintenance measures. (Log Burner Fireplaces Burntwood)
Chimney Repair Burntwood
Chimney repair is a crucial aspect of maintaining an efficient and safe fireplace or heating system. With the passing of time, chimneys can suffer from wear and deterioration, leading to issues such as cracks, leaks or blockages. Repairs carried out in a timely manner are essential to avoid potential threats like fire and carbon monoxide exposure. Professional chimney repair specialists in Burntwood can deal with these issues, ensuring that the chimney functions optimally and adheres to the appropriate safety specifications. Extending the chimney's lifespan and reducing the necessity for expensive future repairs, regular repairs and inspections afford homeowners peace of mind and a dependable heating source. (93852 - Chimney Repairs Burntwood)
Doing a Search On the Internet
It is considerably easier to track down a tradesman or service right now than it was previously, because we've got the advantages of technological innovation and can quickly just do a search on the web. Yahoo, Google, Bing or Ask will offer on the spot results that will to a certain degree be associated with your search. However, the opening page results displayed on the principal search engines are certainly not always the best ones for your needs. In this precise scenario you'll be keying in something along the lines of "Burntwood fireplace installation", "fireplace installation near me", "fireplace installation Burntwood" or "fireplace installation in Burntwood" to track down the best individual.
Directories such as Foursquare, Yelp, Three Best Rated or Yell, or entries from the top trade portals like Checkatrade, My Builder, TrustaTrader, Quotatis, Bidvine or Rated People will likely feature highly on the first page of results, as will strictly PPC (Pay Per Click) adverts. If you check out the 2nd or 3rd pages of the listing results you may perhaps be more likely to find websites belonging to real fireplace installers in the area. So you'll have to navigate further to find them.
Burntwood Fireplace Related Tasks
Your local fireplace fitter can perform a whole medley of tasks and services including chimney lining, wood burning fireplaces, fireplaces, gas fireplaces, fireplace fitting, marble fireplaces, chimney modifications, open fireplaces, reclaimed fireplaces, Victorian fireplaces, contemporary fireplaces, 2-sided fireplaces, inglenook fireplace installations, 3-sided fireplaces, fake fireplace installation, elm fireplaces, made-to-measure fireplaces, hearth fireplaces, multifuel & wood burning stoves, fireplace design, electric fire baskets, the installation of modern fireplaces, cast iron fireplace installation, fireplace packages, gas fireplace installations, inset stove installation, fireplace services in Burntwood, chimney cowl installation, fireplace removal, traditional fireplaces, and more. If there's something fireplace related, that you need but cannot see listed here, you could always go to this QUOTE FORM and fill out your details.
Fireplace Installers Near Burntwood
Also find: Woodhouses fireplace installers, Longdon fireplace installers, Chasetown fireplace installers, Little Norton fireplace installers, Hammerwich fireplace installers, Pipehill fireplace installers, Burntwood Green fireplace installers, Wimblebury fireplace installers, Clayhanger fireplace installers, Chase Terrace fireplace installers and more. There are people who fit fireplaces in almost all of these villages and towns. These tradespeople, with their expertise and knowledge, are well-equipped to perform successful fireplace installations in your home. Dedicated experts facilitate residents in enjoying the ambiance, comfort and warmth that come with having a fireplace in their living spaces. By clicking here, fireplace installation quotes are accessible to local home and property owners.
Fireplace Services Burntwood
- Burntwood Fireplace Fitters
- Burntwood Fireplace Installation Quotations
- Burntwood Fireplace Repairs
- Burntwood Cast Iron Fireplaces
- Burntwood Wood Burning Fireplaces
- Burntwood Fireplace Installation
- Burntwood Fireplace Installers
- Burntwood Brick Fireplaces
- Burntwood Fireplaces
- Burntwood Fireplace Surrounds
- Burntwood Fireplace Installation Services
- Burntwood Fireplace Mantels
- Burntwood Victorian Fireplaces
- Burntwood Stone Fireplaces
More Burntwood Tradespeople: Naturally, whenever you are doing home improvements and repairs in Burntwood, you'll probably be in need of all kinds of different tradesmen and aside from fireplace installers in Burntwood, you could also need a painter/decorator in Burntwood, waste removal in Burntwood, a cleaner in Burntwood, roof cleaning in Burntwood, a plumber in Burntwood, a bricklayer in Burntwood, SKIP HIRE in Burntwood, an odd job man in Burntwood, a floor fitter in Burntwood, a chimney sweep in Burntwood, brick cleaning in Burntwood, an electrician in Burntwood, a damp proofer in Burntwood, and other different Burntwood tradesmen.
If you're interested in local Burntwood information look here
Fireplace installation in WS7 area, (dialling code 01543).
Fireplaces Burntwood - Fireplace Fitters Burntwood - Fireplace Installation Quotes Burntwood - Fireplace Installation Near Me - Gas Fireplace Burntwood - Fireplace Installers Burntwood - Fireplace Ideas Burntwood - Fireplace Installation Services Burntwood - Fireplace Fitter Burntwood