Fireplaces Oakwood

Oakwood Fireplace Installation & Repair

Fireplace Fitter Oakwood Greater London (N14): A fantastic way to add a touch of character and a homely feel to any house in Oakwood, is to re-open an old unused fireplace to put in a wood burning, multi-fuel or open fireplace. The addition of an open fire or wood burning stove for those chilly winters' days can even prove more cost effective than some central heating systems, as long as you've got a ready source of timber. If combined with a back boiler it can supply you with plentiful steaming hot water at the same time.

Oakwood Fireplace Quotes

If you are going to build an attractive, efficient and safe fireplace in your house in Oakwood, there are crucial things you must think about before you commence any work. Any work that's completed on your hearth, chimney breast, flue lining and fireplace must follow the UK Building Regulations, Part J for heating appliances. For the installation of a fireplace in a building that is listed, or one which is positioned in an official conservation area, you'll have to find out from the local authorities if planning permission will be required.

Oakwood Fireplaces Greater London


A straightforward renovation of a current fireplace can probably be executed by a skilled DIY enthusiast, however if any building work is needed there's the possibility of running into structural issues which will need to be dealt with by a professional. It could be that so as to get a fire burning in your fireplace once more you will need nothing more than a quick clean of the hearth and a visit from a chimney sweep. However, what you will likely discover is a pile of old bricks that hides problems such as a blocked chimney or a lintel that needs replacing.

A poorly fitted fireplace can cause serious respiratory health problems and fire risk and should only be fitted by a professional fireplace installer in Oakwood with the knowledge and experience to do the job safely. As mentioned in the Building Regulations for fireplaces, the airflow in a room must be adequate where a fireplace is installed, because in order for it to burn properly and efficiently, the right level of oxygen is required. Not enough oxygen means the fire will not burn properly, and carbon monoxide could accumulate, which can lead to death.

To safely get over any airflow problems, vents might be fitted around the room during a fireplace installation, to guarantee suitable oxygen levels are able to reach the fire. They may have to install vents in unused chimney flues which sometimes trap condensing air and cause damp spots and staining to your chimney breast.

Oakwood Fireplace Installation


Huge amounts of soot and dirt will enter your room when you're opening up an unused fireplace for renovation. Essentially, this is an exceptionally messy job. So that the furniture, carpets and rugs in a room do not get impacted by the grime and soot that is released during the fireplace installation work, it's advisable to remove them beforehand. If you're installing a fireplace as part of a larger restoration project then it should be one of the initial tasks to be done once you have taken the room back to bare walls and floors. This will help to avoid damage to other stages of your restoration project (i.e. fresh plasterwork or painted walls), by soot and other chimney related dirt that is emitted.


You will get a far better idea about the restoration work that needs doing, once the opening up of the old fireplace is completed. You will also be able to sweep the chimney and clean up any of the hearth that has survived. The very first job on your checklist should be to contact a decent Oakwood chimney sweep. After sweeping, they will be able to offer professional advice on the state of the chimney structure and flue liner, and inform you if there are any parts that need replacing.

Fireplace Fitter Quotes in Oakwood Greater London

If you need to strengthen the chimney or install a flue lining all UK Building Regulations must be followed. This is not going to be the type of work that you can do yourself, therefore you will need to hire a capable builder or fireplace installer who is experienced in good construction practices and a knowledge of the appropriate Building Regs.

In older buildings you might find that the existing fireplace is too wide for your needs, which will mean that a concrete or steel lintel will be needed to modify the opening. The repair, upgrade and installation of the hearth can commence once the lintel is in position. If the current hearth is sunken into the floor you'll have to raise it above floor level to comply with the latest UK Building Regulations. You will find that there's a whole host of pre-formed hearths in granite, marble or slate, but if your fireplace is of non-standard size you may have to opt for a custom-made hearth, which you should ask your fireplace builder in Oakwood about.

Fireplace Fitter Near Oakwood Greater London


Browsing on the web or visiting the nearest fireplace outlet will give you a sense of the huge selection of different designs and styles of fireplace for you to pick from. So you can choose a fireplace that complements your decor, and is also appropriate for your existing chimney and flue, it is recommended that you get the guidance and advice of the sales and installation team.

Certain rooms and properties will be more suited to an open fireplace than a multi-fuel stove or a wood burner and vice versa. As an example, the perfect backdrop to a wood-burner stove is an inglenook fireplace, which not only emphasises its charm and character but is also brilliant at reflecting the heat back into the room.

For homes in Oakwood that don't have a chimney, a wood burner stove is an excellent solution. You do not have to have an existing chimney to benefit from a real fire, providing that you have an external wall through which a stainless steel flue from the wood burner can be routed.


A flickering fire on a cold, dark evening delivers an ambience and charm that can't be matched, however what else is available to install in your brand new fireplace in Oakwood?

Fireplace Fitters Oakwood

Wood Burning Stoves - A wide array of styles to go with any age of home in Oakwood, and, if necessary, can even be freestanding. If combined with a back boiler these are able to provide piping hot water to heat radiators or for other use in your home.

Gas Fireplaces - Providing instant heat and more thermally efficient when compared to wood burning stoves, there are a wide array of designs to suit any type of Oakwood home. Gas fireplaces must only be installed and maintained by a certified Gas Safe registered technician, (previously CORGI registered).

Electric Fireplaces - These can be fitted easily and safely by any competent individual and there are varieties which are suitable for just about any room and home in Oakwood. Today's electric fires can be installed in your house, even if you have a regular fireplace, and many of them look almost like an authentic fire with crackling sound effects and dancing flames.

Multi-Fuel Stoves - To establish an eye-catching centerpiece in your property in Oakwood, these can be used with a selection of fuels, such as gas, wood, oil or smokeless coal. One of the most widely regarded brands of multi-fuel stoves is AGA, and these products can not only provide you with low-cost heating for the whole property, but also hot water and cooking facilities.

Open Fireplaces - Provides an attractive focal point for any room and can utilise a variety of solid fuels. Today's fireplaces are no longer the draughty, smoky and inefficient features that they used to be, and an open fire creates a cosy and warm atmosphere for the occupants to enjoy.

Quotes From Open Fire Fitters Oakwood

Fireplace installation work can be done in Oakwood and also in nearby places like: World's End, Oakleigh Park, Chase Side, North Finchley, Freezy Water, Grange Park, Cockfosters, South Barnet, Botany Bay, Osidge, East Barnet Village, together with these postcodes N14 4NW, N14 4QE, N14 4HW, N14 4DF, N14 4EA, N14 4DB, N14 4JG, N14 4LX, N14 4EN, N14 4BG. Oakwood fireplace builders should have the phone code 020 and the postcode N14.

Flue Liners

A chimney liner or flu liner is an important part of your chimney set-up, allowing it to function a lot more efficiently than it would otherwise, and improving the overall safety of your home. Flue liners are conduits made of ceramic material, metal or clay that are installed inside chimneys to carry smoke and fumes to the outside. A chimney on an older house in Oakwood may not be fitted with a flue liner at all, or will need relining subject to it's condition and age.

The burning of fires creates dangerous gases which can cause considerable harm to the flue inside your chimney. You can either ask the chimney sweep to inspect it for damage and potential problems whilst your chimney is being swept, or ask your fireplace builder to assess it. A damaged flue can allow those hazardous gases to leak into your property. There can be an increased potential for house fires when flu liners are defective, as fierce heat can reach the chimney structure, sometimes with serious results. (Tags: Chimney Liner Oakwood, Flue Lining Oakwood, Flue Liners Oakwood).

Improve the Efficiency of Your Open Fireplace in Oakwood

The classic open fireplace may have lost some of its glamour due to environmental concerns but it is still favoured by many homeowners in Oakwood. Sitting beside the warmth of a fireplace, revives many cherished memories for lots of folks. There are numerous positive aspects of having an open fireplace although there are also some negative aspects that could possibly need to be taken care of. As energy costs increase, you need to make certain that your fireplace is giving you heat efficiently. When you've got a fire roaring in the fireplace, it can actually take away warm air out from the room, making your heat source work harder. If you don't have a fire burning, the damper is designed to keep heat in. However, dampers are usually not very effective seals, so all of the warm air escapes and enables cold air to enter the home.

Open Fireplaces Oakwood

Many homeowners that currently have a fireplace in their home in Oakwood don't understand how the fireplace can have an effect on their energy bill. Rather than keeping heating costs down, it could actually do the exact opposite if one is not careful. You will find there's a way to take your less than efficient fireplace, and remake it into a heat generating system that your budget will love. All you need to do is only four fundamental things improve the performance of your fireplace. These will certainly make your current fireplace far more effective, and lower your heating bills.

Step one is to remove your existing damper and swap it for a new top sealing damper. A top sealing damper is installed right at the top of your chimney which also doubles as a storm door. The top sealing damper will keep the air in your home from getting away and operates remarkably well in both cold and hot weather. The damper is straightforward to fit, and can be bought online. An additional thing you're able to do would be to position a fire-back at the back of your fireplace. A fire-back consists of cast iron and it is actually meant to protect the back wall from fire damage, while making your fireplace look more stylish. The fire-back gets warmed up by the flames and reflects the heat back into the room, consequently improving the overall efficiency of the fireplace.

Another way to save money is by using a fireplace fan/heater, which heats the space by pulling the air into a chamber and recycling the air back into the room. These heating devices are enclosed systems, hence no smoke is emitted, and they can really make a difference in the temperature of your house. And finally, putting in glass doors, although a bit on the costly side, can be beneficial in making your open fireplace economical to run. If you do some groundwork, you can certainly get a good deal on glass doors and they aren't that hard to fit yourself. These doors help to keep the heat from leaking out and additionally it keeps children and pets from being burned.

These suggestions are not terribly hard to accomplish and you can purchase all of the items you need from the internet. Retain your current fireplace and reduce heating expenses by making it more efficient.

Chimney Cowls Oakwood

The hood-shaped cover that fits over the chimney to increase the draft and prevent smoke from backing up is called a chimney cowl. Often made out of galvanized iron, the chimney cowl is designed to stop the wind blowing smoke down the chimney and causing a problem. You should install a cowl on your chimney in Oakwood if you to fully enjoy the benefits of a fireplace.

A chimney cowl can also help to protect your house and keep you secure. There are numerous sorts of chimney cowls available, each one is designed to address different issues. Before you purchase one, think about a few factors to make sure you get one that will help protect your home. Once you know what you need, you can then select a chimney cowl based on your needs and budget.

You can also find chimney cowls made from run-of-the-mill products, such as a steel bucket or stainless steel colander. Chicken mesh can also be used to make a cowl. Clay flower pots also make decent chimney cowls. These products can be purchased on the web or at your local hardware store.

Chimney cowls are an easy way to prevent birds from building nests in your chimney in Oakwood. They are cheap and easy to install. You should ensure you have clear access to the area above the chimney stack in order to fit one. It can also prevent dirt and debris from accumulating inside the chimney.

Natural Stone Fireplaces

Why don't you go some way to bringing the outside in and build a spectacular looking stone fireplace? It's possible you have already got a stone feature on the exterior of your home, for instance a stone boundary wall or facade. These exterior features could be matched with your stone fireplace indoors.

Natural Stone Fireplaces Oakwood

There are two ways by which a stone fireplace can be built, and subject to your personal taste and how much cash you're happy to spend, you can choose from full-depth stone or the thinner stone cladding option. You will also need to choose what sort of stone you would prefer for your fireplace, select from: marble, slate, sandstone, limestone, granite or quartz.

The look of your finished fireplace will depend on the kind of stone used, the building technique and the methodology used by the tradesperson or stonemason who builds it. You should get some pictures prepared of the type of design you are searching for, and before work begins, you can discuss them with your fireplace installer.

A lot of contemporary dwellings are not really suited to the look of a stone fireplace, mainly because stone can be so striking, and dominate the appearance of an area. However, each individual homeowner has their own preferences and taste, so it is for them to decide.

Upcoming Articles:

Log burning fireplace Oakwood.

Fireplace Installation Greater London

Oakwood Fireplace Installation Near Me

In Greater London you can also get: Knightsbridge fireplace installation, East Barnet fireplace installers, Forest Gate fireplace installers, North Sheen fireplaces, South Norwood fireplaces, Belsize Park fireplace installation, Lampton fireplace installations, Belgravia fireplace installation, Upminster Bridge fireplaces, Lea Bridge fireplace fitters, Herne Hill fireplaces, Goddington fireplace installation, Woodlands fireplace installation, Golders Green log burner installation, South Kensington fireplace installation, Tottenham Hale fireplace fitters, Bounds Green fireplace installers, Nine Elms fireplace installation, Mill Hill fireplace fitters, Manor House log burner installation, Hampton Wick fireplace installation, Archway fireplace installers, North Harrow fireplaces, Gants Hill fireplaces, Chadwell Heath fireplace installation, Westcombe Park fireplace installers, Beckton fireplace installations, Earlsfield fireplace installers, Collier Row fireplace fitters, Maryland fireplace installations. You shouldn't have too much of a problem locating someone close by when you're searching for fireplace specialists, however even when you're unable to find a suitable fireplace fitter in Oakwood itself, there are plenty of people in every area of Greater London who'll be delighted to help you.

Oakwood Fireplace Related Tasks

Fireplace Related Tasks Oakwood

The assortment of tasks and services that can be accomplished by your local fireplace fitter are wide and varied, and will usually include things like wood & multifuel stove installation, marble fireplace installation, traditional fireplaces Oakwood, fireplace inserts, chimney lining Oakwood, inglenook fireplace installations, gas fireplaces, fireplace packages, electric fire baskets, period fireplaces Oakwood, contemporary fireplaces Oakwood, 2-sided fireplaces in Oakwood, marble fireplaces Oakwood, fireplace installation in Oakwood, Victorian fireplace installation, wood burning fireplace installations, fireplace cleaning Oakwood, cast iron fireplaces in Oakwood, three-sided fireplaces, fireplaces in Oakwood, the installation of modern fireplaces in Oakwood, fireplacequotes, chimney strengthening, chimney modifications Oakwood, built-in electric fires, corner fireplaces Oakwood, fireplace repairs, fire grate conversions, elm fireplaces Oakwood, tiled fireplaces Oakwood, double-sided stove installation Oakwood, cast iron fireplace installations, Victorian fireplace installations, the installation of outdoor fireplaces, stone fireplaces Oakwood, cheap fireplace installation, and others not mentioned. This is simply a small selection of the services available from a local fireplace installer. Oakwood specialists will be happy to provide a complete list of fireplace services when asked. You can always CLICK HERE and fill in the quote form provided, if there are additional Oakwood fireplace requirements that you need but cannot see here.

Oakwood Skip Hire Services

Skip Hire Oakwood

While it's great to do home renovations or improvements on your property in Oakwood, a serious downside can be getting rid of the waste that's generated after the work is completed. Whether or not lots of waste is created by your fireplace installations will depend on the specifics of your particular project, sometimes there'll be a lot of waste, other times not much at all. In many cases the tradesperson you're employing will happily take away the waste that's produced in the course of the project, but be warned - quite a few of them certainly don't!

Whether you are left with doing this yourself, or the tradesman is dealing with it, a skip will sometimes be required. If you've never hired a skip before, then you might not know that skips come in a variety of different sizes and volumes. Skips range from skip bags to mini-skips, midi-skips to builders skips, and for major jobs or commercial use - roll-on roll-off skips.

To get a price for hiring a skip in Oakwood GO HERE.

More Help and Guidance

Fireplace Installation Information Oakwood

To look at fireplace pictures and related social media promotion, check this out. Learn the basics on installing a fireplace mantel and hearth by using You Tube here. These days there are some first-rate articles about fireplace installation on the web, therefore if you are interested in learning about fireplace mantels head here. Loads of facts about fireplace installation is obtainable on any of the fireplace installer forums, so it might be a good idea to head on over to one of the fireplace forums, discussions include things like pellet stoves and boilers, widening a fireplace, building regulations, wood burning stoves, stove vents and chimney designs. Wikipedia is an excellent place to head if you wish to learn more about fireplaces, their page discusses the environmental effects of fireplaces, the various types of fireplace, gas fireplaces, the health effects of fireplaces, the history of the fireplace and the heating efficiency of fireplaces.

Oakwood Fireplace Installation Quotes

Fireplace Installers Near Oakwood

Also find: Grange Park fireplace installers, Freezy Water fireplace installers, Cockfosters fireplace installers, South Barnet fireplace installers, Osidge fireplace installers, Chase Side fireplace installers, East Barnet Village fireplace installers, Oakleigh Park fireplace installers, World's End fireplace installers, Botany Bay fireplace installers, North Finchley fireplace services and more. These and other communities and towns are serviced by fireplace contractors and related tradesmen and women.

Fireplaces Around Oakwood: Fireplace Installation work has recently been done in these Oakwood roads and streets - Old Farm Avenue, Charter Way, Imber Close, Redwood Close, Mayfield Avenue, Pine Close, Pennington Drive, Treves Close, Prince George Avenue, The Rye, Nursery Road, Willow Walk, Burleigh Gardens, Wayside Close, Chelmsford Road, Saxon Way, Greenway, Parkway, Lanercost Gardens, Blagden's Lane, Ramsey Way, Lakenheath, Eversley Park Road, Farmleigh, Leigh Hunt Drive, Ivy Road, as well as the following local Oakwood postcodes: N14 4NW, N14 4QE, N14 4HW, N14 4DF, N14 4EA, N14 4DB, N14 4JG, N14 4LX, N14 4EN, N14 4BG. Work was carried out in these locations by installers of fireplaces. Oakwood homeowners were given reliable and top quality fireplace services on each occasion.

For the best local info about Oakwood, Greater London take a look here

Fireplace installation in N14 area, phone code 020.

TOP - Fireplaces Oakwood

Fireplace Installation Estimates Oakwood - Fireplace Fitter Oakwood - Fireplace Oakwood - Fireplace Fitters Near Me - Fireplace Ideas Oakwood - Fireplace Designs Oakwood - Fireplace Fitters Oakwood - Brick Fireplaces Oakwood - Electric Fireplaces Oakwood


(This fireplaces Oakwood article was created on 31-01-2023)